:: Home / Products / Knee Type Milling Machine

Knee Type Milling Machine Series
JY-2VH
Horizontal head
  • Gear drive milling head.
    The gears are hardened and precision ground.
  • 9 spindle speeds.
  • 5 HP spindle motor.
  • Spindle taper NST#40
Turret type head
  • Belt drive milling head.
  • 16-step speeds 75-3600rpm (standard),
    Variable speeds 80-3800 rpm (optional).
  • 5 HP spindle motor.
  • Milling head tilts 90¢X  right and left.
  • Spindle taper NST#40
Powerful vertical head
  • The gears are hardened and precision ground on the gear drive milling head.
  • 9 spindle speeds.
  • 5 HP spindle motor.
  • Milling head tilts 90¢X  right and left.
  • Spindle taper NST#40
Power elevation of knee
  • The knee elevation is driven by an individual motor for convenient operation. The knee also has rapid traverse function.
Servo motor drive for two axes
  • The X and Y axes are driven by an AC servo motor, providing fast motion. Rapid traverse speed up to 2500 mm/min.
Precision ball screws on X and Y axes
  • The X and Y axes are transmitted by precision ball screws, combined with preloaded double nuts for extremely smooth and high precision working, with minimum backlash.

 

Features

  • The machine column is manufactured from high quality cast iron FC-30, tempered for long term accuracy.
  • FC-30 cast iron table is tempered, hardened and precision ground.
  • The spindle is precision machined from SCM-21 alloy steel. tempered and carbon treated, ensuring maximum stability for heavy duty cutting.
  • X and Y axes are driven by an AC servo motor for smooth traverse.
  • X and Y axis slideways are precision ground, and coated with Turcite-B wear resistant media.
  • The knee is power elevated and has rapid traverse function.
  • X and Y axes employ precision ball screws.
  • The drive gears in the powerful vertical head are hardened and precision ground for maximum wear resistant and low noise running.
  • Equipment with an automatic lubricator for lubrication to 3-axis slideways, feed screws, gears and bearings, ensuring high working efficiency and long service of parts.
  • The coolant tray effectively prevents cutting fluid leakage.
  • Employs high pressure coolant pump for efficient chip removing.
  • Halogen work fight.

Specification
Model
JY-2VH

Table

Table size
1300x300
X-axis travel
1000
Y-axis travel
360/390
Z-axis travel
450/490
T-slot (Size x numbers x distance)
16x3x63
X, Y axes feedrate (variable) mm/min
2500
X, Y axes rapid travel mm/min
2500
Z-axis rapid travel mm/min
750
Vertical Spindle / Turret Head
Spindle speeds RPM (60HZ)
/
Quill travel
/
Quill feedrate (3 steps) mm/rev
/
Spindle nose
/
Swivelling angle of spindle head (R & L)
/
Swivelling angle of overarm
/
Overarm travel
/
Spindle nose to table surface
/
Spindle center to column
/
Powerful Vertical Head
Spindle speeds RPM (60HZ)
9 steps,85-1300
Spindle nose
N.S.T 40#
Spindle nose to table surface
0-386
Spindle center to column
369
Horizontal Spindle / Horizontal Head
Spindle speeds RPM (60HZ)
9 steps,85-1300
Spindle nose (N.S.T.)
N.S.T40#
Dial of milling arbor
25.4
Spindle center to table surface
0-450
Spindle center to overarm bottom
369
Motor
Turret head spindle
/
Horizontal spindle
5HP x 4P AC
Table X ¡BY axes feedrate
750W servo motor
Vertical feedrate
1HP x 6P AC
Coolant pump
1/8 HP
Model
JY-2VH
Net Weight (Approx)
2250
Gross Weight (Approx)
2550
External dimensions(LxW xH) (Approx)
2060x1820x2240mm
Packing dimensions(LxW xH)
2290x1920x2250mm

 
STANDARD ACCESSORIES
 
OPTICAL ACCESSORIES
Automatic lubricator...............
Ball screw (X,Y).....................
Complete cooling system.......
Tool kits...............................
Tool box...............................
Milling arbor with spacer........
Draw bar..............................
Splash guard........................
Chip guard...........................
Halogen work light................		 1set
1set
1set
1set
1pc
1set
1pc
1set
1pc
1pc
 
Turret head variable speeds 80-3800 rpm.......
Z axis with inverter......................................
Digital readout............................................
Air power draw bar......................................
Dividing head.............................................
Rotary table...............................................
Swivel milling vise.......................................
Face milling cutter......................................
Face cutter arbor........................................
End mill collets...........................................

1set
1set
1set
1set
1set
1set
1set
1pc
1pc
1set

 


JIUH-YEH PRECISION MACHINERY CO., LTD.
No.195, Rd.11, Ta-Li Industrial Park, Ta-Li City, Taichung Hsien, Taiwan.R.O.C.
Tel :886-4-24915298,24911002 Fax: 886-4-24915301   E-mail : mill-star@umail.hinet.net